Hooking Up The Audio Components - Sony MDS-JB940 Operating Instruction

Hooking up the audio components
'CONTROL ani 'AC power cord
1) Digital equipment with à DIGITAL OUT conne
2) Digital equipment with b o t h DIGITAL IN and OUT connectors
Required cords
{BY Audio connecting cords (2) (supplied)
When connecting an audio connecting coed, be sure to
colorcone pins to the appropiate jacks. white deft)
ht red
Mit (L) We ()
Rad (8) eo ox ed)
'Optical cables (3) (oniy one supplied)
* When connecting an optical cable, ake the caps off be
connectors and umeri the cable plugs sagt n until they click
into place.
+ Do not bend or tie the optical cable.
pauns Sumoo |
toa wall out
+ Tum off the power of all components before making any
+ Do not connect any AC power cord until al the
to prevent hum and
Jacks (connectors) for connecting audio
components
Comet Je |
a hu |
pict
CD p l a y e r s or DBS toners
DIGITAL COAXIAL INOUT
jacks
or DIGITAL OPTICAL
[INYOUT connector
Digital amplifiers. DAT decks,
ce another MD deck
1) There i no distinction of INI and IN? connectors
'Hooking up the audio components | 11 32