Table of Contents
Advertisement
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasten-
ers work loose
Always have the security
of the fasteners checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Clean the contact surfaces
of wheel hub 1 and wheel
centring spigot 2.
ATTENTION
Use of hard or sharp-edged
objects in proximity to com-
ponent
Component damage
Take care not to scratch
components; cover or mask
as necessary.
Seat the rear wheel on the
rear-wheel adapter.
Install bolts 1 and tighten to
the specified torque.
Rear wheel to wheel
carrier
Tightening sequence: Tighten
in diagonally opposite se-
quence
M10 x 53 x 1.25
60 Nm
Lightly lubricate the inner face
of new clamp 4.
Lubricant
Optimoly TA
173
Advertisement
Chapters
Table of Contents
