Telephone Directory; Store A Number/Name In The Directory - VTech t2350 User Manual

Telephone Directory

Your phone can store 10 (including the nine speed dial entries) numbers with names (up to 15 characters
for the name and 24 digits for the number) in each handset.
• Press REDIAL/
When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be
PAUSE to display
able to store a new number until you delete a stored number.
the last number
dialed from this

Store a Number/Name in the Directory

phone to store it in
speed dial memory.
1. Press PROG. The screen displays DIRECTORY.
• Each handset's
2. Press SELECT. The screen displays ENTER NAME.
speed dial entries
3. Using the chart on page 14, enter up to 15 characters for the name you're storing with the number.
are independent
Use
from the other. For
4. When you finish entering the name, press SELECT. The screen displays ENTER NUMBER.
example, a speed
5. Enter the telephone number. Use
dial entry stored
in HS1 cannot
Press REDIAL/PAUSE to store a pause in the dialing sequence.
be accessed/dialed
-OR-
by HS2
Press REDIAL/PAUSE if you wish to display and then store the last number dialed.
6. Press SELECT. The screen displays DISTINCT RING? and the current setting.
7. Press
to calls from this number by changing to a distinctive ringing pattern after the first ring.
Choose N for a normal ringing pattern.
8. Press SELECT to confirm your selection. If you chose Y, a D will be displayed with the directory
entry.
16 BASIC OPERATION
to backspace and make corrections; use
to backspace and make corrections.
to change the setting. Choose Y (for yes) if you wish the phone to alert you
or
www.vtechphones.com
or to advance and add a space.