Record Your Announcement; To Review Your Announcement At Any Time; To Delete Your Announcement; Setting Up Your Answering System - VTech t2350 User Manual

Answering System Operation At The Base

Record Your Announcement

1. Press PROG until you hear "Record outgoing message."
• Announcements
2. Press REC/MEMO. After you hear "Now recording" followed by a beep, speak toward the base
less than three
to record an announcement up to 90 seconds long.
seconds will not
be saved.
3. Press PLAY/STOP. The system plays back your recorded message.

To review your announcement at any time:

1. Press PROG until you hear "Record outgoing message."
2. Press PLAY/STOP. The system plays the current announcement.

To delete your announcement:

Press DELETE during announcement playback. The system will use the pre-recorded announcement
until you record a new one.

Setting Up Your Answering System

You can set up one feature at a time, or you can set up a feature and then move on to set up the other
features in sequence.
1. Press PROG until the system announces the feature you want to set. Refer to the Feature
Summary on the following page for a description of the features and your choices.
2. Press CHANGE until the system announces the desired setting.
3. Press TIME/SET to confirm your selection.
4. Press PROG to move on to the next feature, or press PLAY/STOP button to exit feature
setup.
24 BASIC OPERATION www.vtechphones.com