Table of Contents
Advertisement
Available languages
Available languages
•
Do not expose the monitor and
the monitor cable to excessive
heat or cold, water, moisture,
dust, or smoke.
•
Do not use the monitor in direct
sunlight, environments that are
dusty or oily, have significant
temperature fluctuations, high
humidity, or poor ventilation.
•
Avoid strong vibrations, e.g., by
dropping the monitor.
•
Do not reverse connection cable
polarity.
•
Fasten the cables securely.
•
Do not pull on the cables.
•
Ensure that there is sufficient
space on the other side for the
drill head to emerge.
•
When working on the electri-
cal system, the batteries must
be separated from the vehicle
ground. This applies to the main
and additional batteries.
•
When making electrical connec-
tions, ensure the following:
They are not kinked or
twisted.
They do not rub on edges.
They are not laid in sharp-
edged through-holes with-
out protection.
•
When testing the voltage in
electrical cables, only use a
diode test lamp or a voltmeter.
Test lamps with a bulb consume
too much voltage, which can
damage the vehicle's electronic
system.
•
Insulate all connections.
•
Secure the cables against
mechanical stress with cable
binders or insulating tape, e.g.,
to existing lines.
•
Do not operate the monitor with
wet hands.
•
The picture quality can be im-
paired in the vicinity of electro-
magnetic fields. Do not mount
the monitor near loudspeakers.
5
Intended use
The monitor is intended for use in vehicles. The mon-
itor is suitable for monitoring vehicles and ships by
connecting to cameras (e.g., reversing video systems)
and other video sources.
The monitor has been designed for commercial use.
The monitor is not intended to be installed outdoor.
This product is only suitable for the intended purpose
and application in accordance with these instructions.
This manual provides information that is necessary for
proper installation and/or operation of the product.
Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and
a possible failure.
The manufacturer accepts no liability for any injury or
damage to the product resulting from:
•
Incorrect assembly or connection, including
excess voltage
•
Incorrect maintenance or use of spare parts
other than original spare parts provided by
the manufacturer
•
Alterations to the product without express
permission from the manufacturer
•
Use for purposes other than those described
in this manual
Dometic reserves the right to change product ap-
pearance and product specifications.
6.1
Installation
6.1.1
Installaction location
CAUTION Risk of injury
•
Select the location of the moni-
tor so that it cannot injure the ve-
hicle passengers under any cir-
cumstances (e.g., sudden brak-
ing or traffic accidents).
•
Never install the monitor in the
airbag deployment path.
•
The monitor must not impair the
driver's view while driving.
7
Advertisement
Table of Contents
