Intended Use; Technical Description - Dometic M9LQAHD Installation And Operating Manual

No. Description
5 Sun guard
6 Monitor bracket
– Fastening material
6

Intended use

The monitor is intended for use in vehicles. The monitor is suitable for monitoring vehicles and ships by connect-
ing to cameras (e.g., reversing video systems) and other video sources.
The monitor has been designed for commercial use.
The monitor is not intended to be installed outdoor.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
7.1

Technical description

7.1.1 Function description
Up to 4 cameras or other video sources (e.g., DVD player) can be connected to the monitor and displayed simul-
taneously. It is possible to switch between the connected video sources.
The monitor is equipped with an automatic scanning function which allows different set camera modes to be dis-
played on the monitor one after another, proceeding with the set time.
The monitor is equipped with a trigger function that activates certain camera modes as soon as a trigger is reg-
istered by engaging reverse gear. The camera mode to be displayed and the time at which the camera mode is
displayed can be optionally defined.
For the use of rear cameras the monitor displays parking lines that can be scaled or switched off.
The monitor can be operated using the monitor buttons or the touchscreen.
Content on the display can be zoomed in or out using the zoom function of the touchscreen.
The monitor is equipped with a power-on function that allows the monitor to be switched on automatically as
soon as the vehicle ignition is activated.
Quantity
1
1
–
7