Dometic CFX-WD Manual

The wireless display CFX-WD allows data, such as the
current temperature, power supply or alarm, to be shown
up to 15 m away from the CFX cooler.
Operating and display elements
Description Explanation
LED lights up green:
P
LED lights up orange:
a
LED flashes red:
°C/°F button Switches between °C and °F
• Show set cooling temperature (SET)
• Set temperature alarm (ALERT)
SET button
• Switch wireless display on/off (ON/OFF)
• The +/– buttons set the temperature alarm.
• The – button switches the backlight on and off.
+/– buttons
• The + button turns on/off the alarm sound.
Operating the wireless display
Selecting the temperature unit
✓ Press the "°C/°F" button to switch between °C and °F.
Showing the current temperature/power supply
The display indicates the current temperature of the cooler.
When the cooler is connected to a 100 – 240 V AC mains
supply, the display shows "AC". When the cooler is
operated with 12/24 V DC, the display shows the input
voltage and the mode set for the battery monitor
(VH – HIGH, VM – MEDIUM, VL – LOW).
Showing the set temperature
➤ Press the "SET" button once.
✓ The display indicates the set cooling temperature.
CoolFreeze Accessory
Wireless display CFX-WD
Compressor is on
Compressor is off
Device is switched on but not ready for operation
Setting the temperature alarm
➤ Press the "SET" button twice.
➤ Press the "+/–" buttons to set the temperature alarm
("OFF": no alarm, "01": alarm at ± 5 °C/°F, "02": alarm
at ± 3 °C/°F).
Switching the wireless display on/off
➤ Press the "SET" button and hold it down for two
seconds.
✓ The display is switched on or off.
The backlight is automatically switched off during battery
operation.