Outdoor Fireplaces - Barbara Jean OB24MVN Manual

LED Lighting – OFP Outdoor Fireplaces
Please follow the current ANSI/NFPA 70 National Electrical Code in the USA and CAN/CSA C22.1 Canadian
National Electrical Code in Canada.
NOTE: If appliance is directly connected to an electrical supply, it must be anchored using anchor points provided in
bottom of appliance. Use cord and wire restraints provided also.
Electrical Grounding Instructions
This appliance is equipped with a three prong (grounding) plug for your protection against shock hazard and should be plugged
directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this.
The fireplace receptacle must be connected to an external GFI protected outlet installed near the fireplace.
Before Servicing
1. Ensure all power supply is shut off.
2. Label all wires prior to disconnecting when servicing control. Wiring errors can cause improper and dangerous operation.
OFP - TOP VIEW
ANCHOR
POINT
LED LIGHT
STRIP
LED
CONTROL
BOX
-Junction Box-
Must be
connected to
an external GFI
outlet
JUNCTION
BOX
ANCHOR
POINT
⚠
WARNING
ANCHOR
POINT
FRONT OF
UNIT
LED LIGHT
STRIP
ANCHOR
POINT
OFP – RIGHT SIDE VIEW
LED
CONTROL
BOX
LED LIGHT
STRIP
LED LIGHT
STRIP
60