Table of Contents
Advertisement
OFP4336 / OFP5548 / OFP7972 Wind Guard Glass Installation
Wind Guard Glass must be installed for safety and in order for unit to function properly.
Step one: Place Wind Guard Glass into Glass Mount Brackets.
Step two: Center Wind Guard Glass in appliance and tighten screws in Glass Mount Brackets. Do NOT over tighten.
Glass Mount
Bracket
Wind Guard
Glass
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
Stainless Steel Parts And Accessories
NOTE: The protective wrap on stainless steel parts is best removed at room temperature. A hair dryer may be
helpful.
Cleaning Stainless Steel
Stainless steel tends to oxidize or stain in the presence of
chlorides and sulfides, particularly in coastal areas and
other harsh environments, such as the warm, highly
humid atmosphere around pools and hot tubs. These
stains could be perceived as rust, but can be easily
removed or prevented. To provide stain prevention and
removal, wash all stainless steel surfaces every 3-4
weeks or as often as required with fresh water and/or
stainless steel cleaner.
Notes on Cleaning Stainless Steel Surfaces: Do not
use abrasive cleaners or steel wool on any painted, or
stainless steel parts. Doing so will scratch the finish.
Exterior surfaces should be cleaned with warm soapy
water. Use a stainless steel or a non-abrasive cleaner.
Always wipe in the direction of the grain.
Over time, stainless steel parts discolor when heated,
usually to a golden or brown hue. This discoloration is
normal and does not affect the performance of the appliance.
34
Advertisement
Table of Contents
