Table of Contents
Advertisement
OB--UIK Universal Installation Kits - 21-1/2" Wide – Single Burner Systems
1.
OB36UIK – for OB24/36 Burners [Size: 21-1/2" x 56-1/2"]
□ [Qty 2] End Plates
□ [Qty 2] Center Plates -12"
□ [Qty 4] Joining Brackets
□ [Qty 4] Seam Plates
□ [Qty 4] Support Brackets
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
Support
Brackets 11"
End Plate
Seam Plate not
required if Valve
Discard
Discard
Box is mounted
here.
3.
OB72UIK – for OB72 Burners [Size: 21-1/2" x 92-1/2"]
□ [Qty 2] End Plates
□ [Qty 2] Center Plates – 48"
□ [Qty 4] Joining Brackets
□ [Qty 4] Seam Plates
□ [Qty 4] Support Brackets
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
Valve Box opening must be
located in the center of the
Burners.
Packaged by: #_________
Joining Brackets 11-1/2"
Seam Plates 3"
Center Plates
(See Kits above for Length)
End Plate
Remove [Qty 2] Large Washers from
Valve Box and discard. Small Spacer
Washer must be used to create a
gap for Valve Box Cover to go on.
Remove [Qty 2] Mount Brackets from
Valve Box and discard when mounting to
UIK Kit.
Valve Box
Cover from OB
Burner System
Center Plates
Top of Valve Box opening must be
flush with Support Brackets.
2.
OB48UIK - for OB48 Burners [Size: 21-1/2" x 68-1/2"]
□ [Qty 2] End Plates
□ [Qty 2] Center Plates – 24"
□ [Qty 4] Joining Brackets
□ [Qty 4] Seam Plates
□ [Qty 4] Support Brackets
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
Top of Valve Box opening
must be flush with Support
Brackets
4.
OB96UIK - for OB96 Burners [Size: 21-1/2" x 116-1/2"]
□ [Qty 2] End Plates
□ [Qty 2] Center Plates – 72"
□ [Qty 4] Joining Brackets
□ [Qty 4] Seam Plates
□ [Qty 4] Support Brackets
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
Center Plate from UIK Kit
Center Plates
Enclosure shown with
OB36 Burner & OB36UIK
Center & End Plate from UIK Kit
Spacer Washer
is between UIK
Kit and Valve
Box.
Spacer Washer
is between UIK
Kit and Valve
Enclosure shown with
OB72 Burner & OB72UIK
Box.
19
Advertisement
Table of Contents
