Uik Width Extension Kits- Up To 33 - Barbara Jean OB24MVN Manual

OB - - UIK EXT W Width Extension Kits for OB - - UIK Universal Installation Kits
7. OB36UIK EXT W – for OB24/36 Burners
Size: 21-1/2" to 33" x 56-1/2"
□ [Qty 4] End EXT Plates
□ [Qty 2] Center EXT Plates - 12"
□ [Qty 16] ¼-20 x ½" Carriage Bolts & KEPS Nut
End EXT Plate
Discard
Discard
Remove [Qty 2] Mount
Brackets from Valve Box
and discard when
mounting to UIK Kit.
9. OB72UIK EXT W - for OB72 Burners
Size: 21-1/2" to 33" x 92-1/2"
□ [Qty 4] End EXT Plates
□ [Qty 2] Center EXT Plates - 48"
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
End EXT Plate
Discard
Discard
Center Plate from
UIK EXT W Kit
Packaged by: #_________
-For Enclosures over 21-1/2" to 33" Wide-
Center EXT Plate
Remove [Qty 2] Large
Washers from Valve Box
and discard. Small Spacer
Washer must be used to
create a gap for Valve
Box Cover to go on.
Center EXT Plate
Discard
Discard
Spacer Washer is
between UIK EXT W
Kit and Valve Box.
Top of Valve Box opening
must be flush with Support
Brackets.
8. OB48UIK EXT W - for OB48 Burners
Size: 21-1/2" to 33" x 68-1/2"
□ [Qty 4] End EXT Plates
□ [Qty 2] Center EXT Plates - 24"
□ [Qty 20] ¼-20 x ½" Carriage Bolts & KEPS Nut
End EXT Plate
Note orientation
13-7/8"
of EXT Plates
from end of UIK
10. OB96UIK EXT W - for OB96 Burners
Size: 21-1/2" to 33" x 116-1/2"
□ [Qty 4] End EXT Plates
□ [Qty 2] Center EXT Plates - 72"
□ [Qty 24] ¼-20 x ½" Carriage Bolts & KEPS Nut
End EXT Plate
UIK Kit
Valve Box opening
must be located in the
center of the Burners.
Center EXT Plate
UIK Kit
End EXT Plate
Top of Valve Box
Enclosure shown
opening must be flush
with OB36 Burner,
with Support Brackets
OB36UIK &
OB36UIK EXT W
Note orientation
of EXT Plates
Center EXT Plate
UIK Kit
End EXT Plate
Enclosure shown with
OB72 Burner, OB72UIK &
OB72UIK EXT W
21