OFP4336 / OFP5548 / OFP7972 -Burner Removal / Installation
⚠
THE FOLLOWING MUST BE PERFORMED BY QUALIFIED INSTALLERS ONLY.
To remove burner:
1. Disconnect gas supply. Caution: only a qualified person should do this.
2. Remove Access Cover.
3. Remove Screws in Burner Tray and Valve Bracket.
Remove
Screws in
Burner Tray
ACCESS
COVER
VALVE LOCATION
BURNER
AND VALVE
ASSEMBLY
WARNING: Failure to position the
parts in accordance with these
diagrams or failure to use only parts
Remove
specifically approved with this
Screws from
appliance may result in property
Valve
damage or personal injury.
Bracket
TO INSTALL BURNER, REVERSE ABOVE STEPS.
35