LED Lighting - Custom Enclosures
Please follow the current ANSI/NFPA 70 National Electrical Code in the USA and CAN/CSA C22.1 Canadian
National Electrical Code in Canada.
NOTE: If appliance is directly connected to an electrical supply, it must be anchored using anchor points provided in
bottom of appliance. Use cord and wire restraints provided also.
⚠
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three
prong (grounding) plug for your
protection against shock hazard and
should be plugged directly into a properly
grounded three-prong receptacle. Do not
cut or remove the grounding prong from
this.
The fireplace receptacle must be
connected to an external GFI
protected outlet installed near the
fireplace.
Before Servicing:
1.
Ensure all power supply is shut off.
2.
Label all wires prior to disconnecting
when servicing control. Wiring errors
can cause improper and dangerous
operation.
UNIVERSAL
VALVE BOX
CUSTOM ENCLOSURE - SIDE VIEW
LED
CONTROL
BOX
LED LIGHT
PAN
GFCI Receptacle
(Not Provided)
-Follow Local Codes-
59