Download
Share
Print this page
Lifetime 60429 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Sports & Outdoors
  5. 60429
  6. Assembly instructions manual

Lifetime 60429 Assembly Instructions Manual

Extreme weather kit
Hide thumbs

Advertisement

Quick Links

Download this manual
EXTREME
WEATHER KIT
MODEL 60429
BEFORE ASSEMBLY:
• Assemble on a level surface
• 3+ people recommended for setup
FOR DOMESTIC USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
(Not included—unless otherwise indicated*)
HDS (x1)*
(included)
QUESTIONS?
Call:
1-800-225-3865
English, French, Spanish
For use with models:
60230
60299
60358
60370
60414
60202
60211
60295
60356
60408
60425
ARA (x1)*
1/2" (≈13 mm)
(included)
CONTACT LIFETIME
Live Chat:
www.lifetime.com/customerservice
(click on "LIVE CHAT" tab)
Pour le français, voir la page 2. Para el español, ver la página 3.
BQN (x1)*
(included)
CUSTOMER SERVICE:
®
For Customer Service in mainland Europe:
E-mail:
csinternational@lifetime.com
ASSEMBLY INSTRUCTIONS
TABLE OF CONTENTS
Icon Legend....................................4
Warnings & Notices........................5
Wall/Truss Support Installation........6
Truss Support Assembly................19
Parts Identifi er..............................i-iv
Door Support Assembly................31
Cleaning & Care............................52
Registration..........................53
Warranty.................................57
BQL (x1)*
(included)
Model Number: 60429
Product ID:

Advertisement

loading
Need help?

Need help?

Do you have a question about the 60429 and is the answer not in the manual?

Questions and answers

Related Manuals for Lifetime 60429

Summary of Contents for Lifetime 60429

  • Page 1 Registration......53 Warranty.........57 ARA (x1)* HDS (x1)* BQL (x1)* 1/2" (≈13 mm) BQN (x1)* (included) (included) (included) (included) Model Number: 60429 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: ® Product ID: Call: Live Chat: For Customer Service in mainland Europe: 1-800-225-3865 www.lifetime.com/customerservice E-mail: English, French, Spanish (click on “LIVE CHAT”...
  • Page 2 1/2" (≈13 mm) (incluse) (incluse) (incluse) (incluse) N° de modèle : 60429 QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME ® Référence du produit : Composer le Chat en direct: Pour les services à la clientèle du continent européen : 1-800-225-3865 www.lifetime.com/customerservice...
  • Page 3 (incluida) (incluida) (incluida) (incluida) 60429 Número de modelo: ¿PREGUNTAS? ® PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Marcar : Para el servicio a clientes en el continente europeo: 1-800-225-3865 Chat en vivo: www.lifetime.com/customerservice Correo electrónico: Inglés, francés, español...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 WALL/TRUSS SUPPORT ASSEMBLY / ASSEMBLAGE DU SUPPORT DES MURS ET DES FERMES / ENSAMBLAJE DEL SOPORTE DE LOS MUROS Y ARMAZONES HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO BRK (x22) ADZ (x102) HNN (x10) AHS (x2) BRP (x20) ADV (x4) ADJ (x20) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal...
  • Page 7  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o HDS (x1) • Remove the header bar and the screws attached to the rear gable of the shed. •...
  • Page 8  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o HDS (x1) • Remove the wall channels and their hardware from all the walls in the shed. If the window wall panel has the wall channels on the outer edges of the window wall panel, they will not have to be removed—only if the wall channel is in the middle of the panel, under the window.
  • Page 9  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) BRP (x20) ADJ (x20) (All bolts may not be required) (All nuts may not be required) (Tous les boulons peuvent ne pas être nécessaires) (Tous les écrous peuvent ne pas être nécessaires)
  • Page 10  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x50) BRK (x10) • Attach a long support channel (HMD) to the end of a truss gutter channel using two (2) self-tapping screws (BRK) as indicated. Connect the support channel to the wall panel using ten (10) screws (ADZ) through the holes along both sides of the length of the support channel.
  • Page 11  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x2) ADZ (x8) • Attach a long support channel (HMD) to the end of the truss gutter channel just above the window wall panel using two (2) self-tapping screws (BRK).
  • Page 12  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o HDS (x1) ADV (x4) • Place end caps (AHS) into the ends of the header bar (BFJ). •...
  • Page 13  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN)  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o ADZ (x10) HDS (x1) •...
  • Page 14  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x1) 1.10 • Place an upper brace (HMC) inside the top of the support channel. Slide the upper brace into the wall channel until the top of the brace is aligned with the top of the header bar.
  • Page 15  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x10) BRK (x5) 1.11 • Pull back on the bottom of the upper brace to align the holes with those in the wall channel. Attach the two using two (2) self-drilling screws (BRK).
  • Page 16  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o ADZ (x20) HDS (x1) 1.13 • Align a bracket assembly next to the fi rst groove on the front, right corner wall panel and secure with ten (10) screws (ADZ).
  • Page 17  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN)  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x4) ADZ (x4) 1.14 •...
  • Page 18  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN)  SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/4 in/po (All lag bolts might not be used) (≈19 mm) (Tous les tire-fonds peuvent ne pas être utilisés) (Es posible no utilizar todos los tirafondos)
  • Page 19 TRUSS SUPPORT ASSEMBLY / ASSEMBLAGE DES SUPPORTS DE FERMES / ENSAMBLAJE DE LOS SOPORTE DE ARMAZONES HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADV (x2) BES (x6) BQI (x1) ADZ (x44) BRK (x87) AAN (x1) ADJ (x6) AVU (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal 19 3/4 in/po (≈50,2 cm)
  • Page 20  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or / ou / o HDS (x1) ADZ (x36) • Align roof brackets (BRC) with the holes in the front roof panel as shown. Secure the roof brackets to the right side of the roof and entry gable using three (3) screws (ADZ) per roof bracket.
  • Page 21  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x72) (All screws may not be used) (Toutes les vis ne peuvent pas être utilisées) (Es posible no usar todos los tornillos) •...
  • Page 22  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po ≈11 mm • Remove the bottom cap nut from the threaded rod in one of the trusses. •...
  • Page 23  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x12) (All screws may not be used) (Toutes les vis ne peuvent pas être utilisées) (Es posible no usar todos los tornillos) •...
  • Page 24  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide the center support and two outer support brackets (HMF & BQX) down behind the holes in the gable support as indicated. If there is diffi...
  • Page 25  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) ADV (x2) • Secure the lateral and the center support brackets to the rear wall and gable using two (2) screws (ADV) and eight (8) screws (ADZ).
  • Page 26  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/2 in/po (≈13 mm (x2)) BQI (x1) AAN (x1) AVU (x1) • Insert a hex bolt (BQI) through the washer (AVU) and the hole in the rear gable.
  • Page 27  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm (x2)) BES (x2) ADJ (x2) 2.11 • Insert a hex bolt (BES) through the square hole and the hole you just drilled in the truss brace nearest to the rear wall.
  • Page 28  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm (x2)) BES (x3) ADJ (x3) 2.12 • Insert a hex bolt (BES) through each hole in the center and outer support brackets to secure the truss/gable supports to the support brackets.
  • Page 29  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x3) 2.13 • Align the notch in the entry gable support bracket (BRB) with the square hole in the middle of the entry header as indicated. •...
  • Page 30  SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm (x2)) BES (x1) ADJ (x1) 2.15 • Remove the cap nut from the threaded rod, and reuse the cap nut to connect the last truss/gable support (BRE) to the threaded rod.
  • Page 31 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS THIS PAGE INTENTIONALLY LEFT BLANK PAGE LAISSÉE BLANCHE INTENTIONNELLEMENT ESTA PÁGINA SE HA DEJADO EN BLANCO INTENCIONADAMENTE...
  • Page 32 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF LARGE BOX / CONTENU DE LA GRANDE BOÎTE CONTENIDO DE LA CAJA GRANDE HMD (x10) 59 1/2 in/po (≈1,51 m) BFJ (x1) HMH (x4) HMG (x4) SMALL PARTS BOX / BOÎTE DE PETITES PIÈCES CAJA DE PIEZAS PEQUEÑAS HMC (x2)
  • Page 33 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS HARDWARE & TOOL BAGS / SACS DE QUINCAILLERIE ET D’OUTILS BOLSAS DE HERRAJE Y DEL INSTRUMENTAL...
  • Page 34 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS THIS PAGE INTENTIONALLY LEFT BLANK PAGE LAISSÉE BLANCHE INTENTIONNELLEMENT ESTA PÁGINA SE HA DEJADO EN BLANCO INTENCIONADAMENTE...
  • Page 35 DOOR SUPPORT ASSEMBLY / ASSEMBLAGE DU SUPPORT DES PORTES / ENSAMBLAJE DEL SOPORTE DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO HMJ (x4) BRO (x16) BRK (x22) ADZ (x16) BRH (x2) ADX (x2) AVU (x4) BQJ (x2) AZP (x4) Parts / Pièces / Piezas Parts / Pièces / Piezas...
  • Page 36  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/2 in/po (≈13 mm) • Remove the two cap nuts and washers from the carriage bolts and bracket from the left door. •...
  • Page 37  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) AZP (x2) HMJ (x2) • Place a vertical door brace (HMH) against the left door and align the two center holes in the door with those in the brace.
  • Page 38  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x5) • Secure the vertical door brace to the door with fi ve (5) self- drilling screws (BRK).
  • Page 39  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Place a second vertical door support (HMH) on the back of the left door so the top of the support is at the same height as the fi...
  • Page 40  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 1/8 in/po (≈3 mm) BRK (x1) • Using an 1/8" (3 mm) drill bit (ARA), drill a hole straight into the hinge tube at the mark just made. Do not drill all the way through the door.
  • Page 41  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x5) • Drill holes into the hinge tube at the fi ve (5) locations shown.
  • Page 42  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) BRO (x4) • Place a top horizontal brace (HMG) on the left door, aligning the holes at the sides of the brace to the holes in the door. The narrow end should face the right side of the door.
  • Page 43  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) BRO (x4) • Place a bottom horizontal brace (HMG) on the left door, aligning the holes at the sides of the brace to the holes in the door. The narrow end should face the right side of the door.
  • Page 44  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Locate the spring locks on the upper and lower areas of the left door. •...
  • Page 45  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3.11 • Carefully remove the two screws and the spring locks from the bottom and top of the left door. Retain the spacer and screws as they will be used with the new spring locks.
  • Page 46  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x2) 3.13 • Place the strike plate (AHL) over the depression in the fl oor at the front of the shed at the left door. Attach with the hardware indicated.
  • Page 47  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 3.14 • Remove the old hardware from the latch on the right door. Be sure to remove the correct hardware. •...
  • Page 48  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) HMJ (x2) AZP (x2) 3.15 • Place the vertical brace (HMH) on the edge of the right door as indicated. Align the two holes in the brace with the holes for the lock.
  • Page 49  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x5) 3.16 • Secure the vertical door brace to the door with fi ve (5) self-drilling screws (BRK). Be sure to secure the screws in the locations indicated below.
  • Page 50  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x6) 3.17 • Place a second vertical door support (HMH) on the back of the right door so the top of the support is at the same height as the fi...
  • Page 51  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) BRO (x4) 3.18 • Place a top horizontal brace (HMG) on the right door lining up the holes at the sides of the brace to the holes in the door. The narrow end should face the left side of the door.
  • Page 52  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) BRO (x4) 3.19 • Place a bottom horizontal brace (HMG) on the right door, aligning the holes at the sides of the brace to the holes in the door. The narrow end should face the left side of the door.
  • Page 53  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AVU (x2) BRH (x1) BQJ (x2) 3.20 • Using a 5/16" (8mm) drill bit (BQN), and, keeping the drill bit level, drill a hole all the way through the door end channel. Connect the required hardware to the door as shown.
  • Page 54  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BRH (x1) AVU (x2) BQJ (x2) 3.21 • Using a 5/16" (8mm) drill bit (BQN), and, keeping the drill bit level, drill a hole all the way through the door end channel. Connect the required hardware to the door as shown.
  • Page 55  SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3.22 • To secure the doors, simply turn the t-knob to insert the locking lever into the notch in the vertical door support. Repeat this step for both locking levers.
  • Page 56 CLEANING & CARE Congratulations on your Lifetime product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. ® The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 57 ® données personnelles à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM En Lifetime , estamos comprometidos a ofrecer productos innovadores y de calidad.
  • Page 58 NOTES / REMARQUES / NOTAS...
  • Page 59 NOTES / REMARQUES / NOTAS...
  • Page 60 NOTES / REMARQUES / NOTAS...
  • Page 61 This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fi tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
  • Page 62 à cette condition et aucun représentant de la société ne peut renoncer à l’application de cette politique ou la modifi er. Ce produit n’est pas destiné à des fi ns institutionnelles ou commerciales; Lifetime Products, Inc. n’assume aucune responsabilité à cet égard. Toute utilisation institutionnelle ou commerciale annule la garantie.
  • Page 63 NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 64 , visiter le : ® www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 www.lifetime.com 1228872_C 10/11/2023...