HOMCOM 820-382V90 Manual page 8

Using the remote control is the same as using
the buttons on the unit. See the operation
section for more information on how to use these
buttons.
NOTE: The remote control does not
lock/unlock the flame and heating function.
The remote control cannot switch the unit
between Fahrenheit and Celsius.
WARNING: Always unplug the appliance before cleaning it. First, turn
off the main power, then remove the plug from the wall outlet.
WARNING: If any part of this appliance has been submerged or
exposed to water, do not use until it has been inspected and any
damaged parts have been replaced by a qualified service technician.
The blower motor and flame motor are pre-lubricated, ensuring durable use without requiring any further maintenance or
lubrication. However, it is recommended to use a soft brush attachment of a vacuum cleaner to clean the outlet grille of
the heater, removing any accumulation of dust or fluff.
Use a soft, clean cloth when dusting to avoid scratching the surface.
For cleaning the fireplace surface, use a clean, soft cloth dampened with warm water. Do not use household or
abrasive cleaners as they may damage the surface.
When cleaning the glass viewing screen, use a non-abrasive damp cloth with liquid cleaner or soft soap if
necessary. Do not use cleaning powders or any other abrasive substances that may scratch the glass.
Do not use this fireplace with a broken or chipped glass panel.
Do not strike or slam the glass.
If your appliance is stained or damaged during use, contact a professional for repair.
When not in use, unplug the cord from the outlet to prevent damage or accidentally turning the appliance on.
7