HOMCOM 820-382V90 Manual page 5

The display unit (1) shows information about the flame
level, timer and current temperature.
The timer button (3) is used to set the amount of time you want the fireplace/heater to run. The button controls both
the flames and the heater function. If the heater is on when the timer is set, then the heater will run on the timer. If
the flames are on, then the timer will control the flames. If the heater and flames are on with the timer set, then the
timer will control both.
To set the timer, press the button in sequence to choose a set interval. The interval period will show in blue on the
display (1) – you can refer to the table provided to see the different intervals available. Once you've selected an
interval, the timer will be counting down from that point. Note: There is no clock function for turning the heater or
flames on or off at a specific time.
4