Table of Contents
Advertisement
Other Features (com.)
Use this feature when you do not want your voice to be
heard by the other party.
Outside Line or Computer
Accessed Line
(Pause Usage)
1
Push
MUTE.
•The MUTE indicator will light.
■ To resume the conversation:
Push the MUTE button again.
•The MUTE indicator will go out.
Using the PAUSE button function during a dial operation
is helpful when accessing an outside line or a computer
accessed long distance service.
■ One pause is required when waiting for an
outside dial tone.
Example (PBX):
Some PBXs require this pause during an automatic
redial.
Flash Button Usage
You can access some of the features of your host PBX by
using the FLASH button instead of the Hookswitch. This is
done by pushing the FLASH button lightly when required.
"FLASH" can also be stored in memory the same as
"Storing Phone Numbers" on page 3-3.
Tone Button Usage
If you wish to change from Pulse to Tone while dialing you
may do so by pressing,
the "TONE (*)" button instead
of changing the DIALING MODE selector.
When you hang up, the unit will automatically return to the
Pulse mode.
■ Two pauses are required when waiting for a
computer tone from long distance service
companies such as MCI, SPRINT, METRO and
others.
Example:
Local access telephone number for the alternate long
distance service company 123-5434,
Authorization no. 563478,
Long distance no. 901-210-9812
Combination Dialing
Any of the following dialing combination is possible.
•Automatic and Manual Dialing
• Pulse and Tone Dialing
•Plural Memory Stations
Advertisement
Table of Contents
