Table of Contents
Advertisement
Preparing the Answering Machine (COnt.)
Selecting the Remote Code No. for Remote Operation
A remote code helps to protect from unauthorized persons accessing your unit and retrieving your messages.
The remote code No. has been set to 111 at the factory. However, you may choose another code from within the following
ranges:
Single Digit
1 to 9
Double Digit
11 to 99
Triple Digit
111 to 999
1
Push FUNCTION.
2
Push REDIAL or MUTE until the following message
is displayed.
3
Enter the desired Remote Code and then push
AUTO/MEMORY
(e.g. If the remote code is 123)
4
Push FUNCTION to end the operation.
FUNCTION
1
■iSH
V_
_/
NOTE:
You cannot use codes which include zero (0). We
recommend that you do not use seven (7) as code
No., since this number is used to control other
remote function.
DISPLAY
SELECT COMMAND
Advertisement
Table of Contents
