Signaling Your Pager That You Have Received Fax Document - Panasonic KX-F880 Operating Instructions Manual

Signaling your pager that you have received a
fax document
This feature allows your unit to call your pager when your unit receives a fax message.
This feature only works with an automatic pager.
1
Press MENU .
2
Press , then
7 0
3
Press START/COPY/SET
Press or
4
If this feature is not required, select "OFF".
5 Press START/COPY/SET
Enter your pager phone number.
6
If this feature does not work properly, press
REDIAL/PAUSE
of your pager phone number to extend the paging
time.
If you wish to display a message on your pager,
enter the message after your pager phone
number and
REDIAL/PAUSE
Programming methods may vary depending on
the pager company. Contact your pager company
for details.
You can enter a total of 46 digits and/or pauses.
7 Press START/COPY/SET
8
Press MENU .
Note:
This feature is not available when the receive mode is
set to the TEL mode.
64
Display:
SYSTEM SET UP
.
FAX PAGER
.
MODE=OFF
to select "ON".
MODE=ON
.
NO.=
more than one time at the end
.
.
Dial keypad
MENU
1 2 3
4 5 6
7 8 9
0
REDIAL/PAUSE
START/COPY/SET