Error Messages For Optional Extraction Capacity Regulation; Warnings - Kemper WeldFil Compact Operating Manual

6.2.12 Error messages for optional extraction capacity
regulation
If there is an error in the frequency converter, the following message
appears on the control display:
Item Description
1 Fault: Frequency converter
fault
2 Error/Fault
3 Hide fault message
Please contact our service department if this error message is displayed.
6.2.13

Warnings

Warnings are used to notify the system operator of non-critical system
conditions or pending maintenance.
1502756-02
Fig. 91: Frequency converter error message
Tab. 75: Frequency converter error message
- 162 -
Item Description
4 Error indicator (number of
error messages)
5 Acknowledgement of error
message
6 Show info text for error
message
EN