Using The Appliance - Immergas VICTRIX EXTRA 12 PLUS Instructions And Recommendations

2.4

USING THE APPLIANCE

Symbol Description and operation
Not used
Not used
Not used
- The symbol on steady indicates the presence of a remote device connected, e.g.: CAR , Smartech Plus, commercial
V2
remote.
It is also active in stand-by and when displaying faults.
- A permanently active symbol indicates the presence of a zone control unit or a BMS system.
It is also active in stand-by and when displaying faults.
Not used
The symbol indicates the presence of an external probe.
It is also active in stand-by and when displaying faults.
The symbol indicates that the boiler is connected to the external server and can be controlled via App (e.g. Dominus).
BOOST Not used
- The symbol flashes when there are faults that must be or can be reset manually.
RESET
- The symbol flashes when special functions are in progress that can be stopped by pressing the key.
- The symbol is permanently active if a service call for maintenance is requested.
- The symbol flashes during calibration.
It is also active in stand-by.
- The symbol is on steady when the keyboard lock is active.
- The symbol flashes when the user presses a key while the keyboard lock is active.
It is also active in stand-by and when displaying faults.
- The symbol on steady indicates that the boiler is in Stand-by at the request of a remote device.
- The symbol is flashing when the boiler is in OFF; the setting can only be activated or deactivated from the control panel.
- The symbol is permanently active when the boiler can meet a DHW request.
- The symbol flashes during a DHW request or during the chimney sweep function. They are also displayed during the
deaeration function and with a fault in progress.
- The symbol is permanently active when the boiler can meet a C.H. request.
- The symbol flashes during a C.H. request or during the chimney sweep function.
They are also displayed during the de-aeration function and with a fault in progress.
The flame icon is only present when the burner is on.
The bars represent the output power level.
65