Troubleshooting
Problem
CONNECTING... s
shown n the handset
dsplay wndow. Why
don't I get a dal tone
when I try to use ths
telephone?
Common cure for
electronc equpment.
40
Suggeston
•
The handset may be out of range. Move t closer to the telephone base.
•
Make sure the power cord s securely plugged nto the telephone base. Use a workng electrcal
outlet that s not controlled by a wall swtch.
•
Reset your telephone by unpluggng the power adapter from the telephone base. Dsconnect
the battery from the cordless handset. Wat for 15 seconds, then plug n the power adapter
and re-nstall the battery. Place the handset n the telephone base and allow up to one mnute
for the handset and telephone base to synchronze.
•
Other electronc products may prevent your handset and telephone base from communcatng
wth each other. Try nstallng your telephone base as far away from these electronc devces as
possble: wreless routers, rados, rado towers, pager towers, cellular telephones, ntercoms, room
montors, televsons, personal computers, ktchen applances and other cordless telephones.
•
If the telephone s not respondng normally, try puttng the cordless handset n the telephone
base. If t does not respond, try the followng (n the order lsted):
•
Dsconnect the power to the telephone base.
•
Dsconnect the battery on the cordless handset.
•
Wat a few mnutes before connectng power to the telephone base.
•
Re-nstall the battery and place the cordless handset n the telephone base.
•
Wat for the cordless handset to synchronze ts connecton wth the telephone base. Allow up
to one mnute for ths to take place.
www.vtechphones.com