VTech LS6115 User Manual page 39

Troubleshooting
Problem
I cannot dal out.
My handset beeps
and s not performng
normally.
The speakerphone
call qualty s poor.
36
Suggeston
• Frst, try all the above suggestons.
• Make sure there s a dal tone before dalng. It s normal f the handset takes a second or two
to synchronze wth the telephone before producng a dal tone. Wat an extra second before
dalng.
• If the other telephones n your home are havng the same problem, the problem s n the wrng
or local servce. Contact your local telephone company (charges may apply).
• Elmnate any background nose. Nose from a televson, rado, or other applances may cause
the telephone not to dial out properly. If you cannot eliminate the background noise, first try
mutng the cordless handset before dalng, or dalng from another room n your home wth
less background nose.
• Make sure the power cord s securely plugged nto the telephone base. Plug the telephone
base nto a dfferent workng electrcal outlet not controlled by a wall swtch.
• Move the handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unpluggng the electrcal power to the base. Wat for 15 seconds
and plug t back n agan. Allow up to one mnute for the cordless handset and the telephone
base to synchronze.
• Other electronc products can cause nterference to your cordless telephone. Try nstallng
your telephone as far away from these electronc devces as possble: wreless routers, rados,
rado towers, pager towers, cellular telephones, ntercoms, room montors, televsons, personal
computers, ktchen applances and other cordless telephones.
• For better call qualty, we recommend that the handset be placed on a table wth the dalng
keys facng up when usng the speakerphone.
www.vtechphones.com