Table of Contents
Advertisement
Handset Settings
Handset Name (preset as VTECH)
•
It is possible to give the Handset its own
unique name. The name is shown when the
Handset is in idle mode. The name can be a
maximum of 16 characters.
• From the idle (OFF) mode, press SEL then the
or
keys to HANDSET NAME.
• Press SEL again. The display will show the
current setting, for example:
• Press DELETE to backspace then spell the
desired name.
NOTE: The characters are entered the same way
as for the phonebook, see the table on page
13.
• Press SEL to confirm the setting.
Language (preset to English)
• From the idle (OFF) mode, press SEL then
the
or
keys to LANGUAGE.
• Press SEL to select this option. Press the
keys to scroll from English to French or Span-
ish.
• Press SEL to confirm the setting.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL then the
or
keys to DIAL TYPE.
• Press SEL then use the
to TONE or PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for pulse dial mode,
it is possible to switch to temporary tone mode
during an ongoing call by pressing TONE. Once
pressed, tone will be used for rest of the call.
After you hang up, the phone will return to pulse
dialing for the next call.
or
or
keys to scroll
*
20
Advertisement
Table of Contents
