Table of Contents
Advertisement
Handset Settings
Handset Name (preset as 'VTECH')
• It is possible to give each Handset its own
unique name. The name is shown in the first
line when the Handset is idle. The name can
be a maximum of 16 characters in length.
• From the idle (OFF) mode, press SEL then
or
key to HANDSET NAME.
• Press SEL again. The display will show the
current setting, for example:
• Press DELETE to backspace then 'spell' the
desired name.
NOTE: The characters are entered in the same
way as for the phonebook, see the table on page
15.
• Press SEL to confirm the setting.
Language (preset to English)
•
From the idle (OFF) mode, press SEL then
or
key to LANGUAGE.
• Press SEL to select this option. Press
keys to scroll from English to French or Span-
ish.
• Press SEL to confirm the setting.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL then
or
key to DIAL TYPE.
• Press SEL then use
TONE or PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for pulse dial mode,
it is possible to switch to temporary tone mode
during an ongoing call by pressing *TONE. Once
pressed, tone will be used for rest of the call.
After you hang up, the phone will return to pulse
dialing for the next call.
or
or
key to scroll to
22
Advertisement
Table of Contents
