VTech IP8100-2 User Manual page 27

Advanced Settings
• Virtual Server: (Default Off): Click On to enable or Off to disable. This indicates
whether the virtual server is initially enabled or disabled when it is created or
modified.
• Name: Enter a name for the virtual server you are setting up.
• Destination IP: Enter the private IP address of the computer that is hosting
the service/application.
Note: It is recommended that Static IP is used as the ISP Connection
Setting when Virtual Server is created.
• Protocol Type: Choose the type of protocol used to access your hosting
service.
• Port: Enter a single port or a range of ports to forward to a computer on your
local network. (Leave this field blank to deny access to all ports.)
Click Apply to save the page settings. Clicking Cancel aborts any changes you
have made on the page.
27