Lenovo 7DCE Messages Manual page 46

Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0074
User Action:
Information only; no action is required.
• FQXSPEM4006I: Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2],
RetryInterval=[arg3], EntryInterval=[arg4].
A user changes the Global Event Notification settings.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0110
User Action:
Information only; no action is required.
• FQXSPEM4007I: Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3],
Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by
user [arg9] from [arg10] at IP address [arg11].
A user adds or updates an Alert Recipient
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0111
User Action:
Information only; no action is required.
• FQXSPEM4008I: SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] .
A user enabled the SNMP Traps configuration
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0112
User Action:
Information only; no action is required.
• FQXSPEM4009I: The UEFI Definitions have been changed.
UEFI Definitions change has been detected
Severity: Info
Serviceable: No
42
ThinkSystem ST250 V3 Messages and Codes Reference