Table of Contents
Advertisement
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector into the
back of the Base Unit.
Connecting to phone line
Plug one end of the telephone line cord into the jack on the back of the Base Unit.
Plug the other end of this cord into the wall jack.
Checking for dial tone
After the battery is charged press ON on the Handset. The Phone icon
on the Handset display, and you will hear dial tone. If not, see In Case of Difficulty.
Tone/Pulse selection
See BASE SETTINGS for details.
CAUTION: Use only the power supply provided with your 2652 Unit.
IMPORTANT:
For best performance the 2652
should be installed as follows:
In an elevated location, in the
center of the room, with no
obstructions nearby.
In a location that is away from
other electrical appliances such as
microwave
ovens,
computers, or televisions.
personal
7
will appear
Advertisement
Table of Contents
