Mem (Memory); To Store A Number/Name - VTech bs2652 User Manual

MEM (Memory)

To Store a Number/Name:

• Starting from the idle screen, enter
the number you want to store in
memory.
• Be sure to include long distance
codes and pauses (using the
Pause softkey) if necessary.
Press OFF to correct if you make
mistake. Press the MEM softkey.
NOTE: If the memory is full the Handset
will display PHONEBOOK IS FULL
and exit to the pre-dial mode
without saving the entry.
• You will then be prompted to ENTER
NAME. Use the digit keys to 'spell'
the name. If you make a mistake,
press the CLR softkey. To enter a
space press . When finished,
press SAVE.
• If there is space available in
memory, the entry will be saved
and the Handset will display
RECORD ANNOUNCE CID?
• If you want to record Name and
Nuamber Announce, please follow
the steps in Record a new Name
and Number Announce - From
New Phonebook Entry on page
34. If not, press and hold OFF.
20