Operating Instructions
Memory Dialing
• Your t 2408 can store up to 10
numbers you can dial with three button
presses: PHONE, MEM then one of the
number keys (0 through 9).
Programming Speed Dial Numbers
• With the handset in OFF mode, press
PROG.
• Press the number of the memory
location you wish to store the number
in (0 through 9).
• Dial the number you want to store (up
to 16 digits).
-OR-
Press REDIAL (to retrieve and save
•
the most recently dialed number.)
• Press MEM to confirm. You'll hear a
confirmation beep.
Speed Number Dialing
• Press PHONE.
• Press MEM and the memory location
number key (0 through 9).
• For example, to dial the number you
assigned to key 8, you would press
PHONE, MEM, 8.
Change or Replace a Speed Dial
Number
• To change or replace a stored number
in speed dial memory, simply enter the
new number and store it in the memory
location you wish to change.
Storing Pauses in Memory
• To insert a pause in a phone number,
press PAUSE. The pause is two
seconds in length. For longer pauses,
press PAUSE again for every additional
two seconds you wish to add to the
pause.
11