Table of Contents
Advertisement
QUICK REFERENCE GUIDE
CONFERENCE
Your SBC9030 allows you to establish
a 3 party conference between the
Handset, Base and the incoming call:
1) Use either the Base or the Handset
to make a call.
2) If you are using the Base to make
the call, the Handset can join the
conference by pressing PHONE.
Or, press the SPEAKERPHONE
key on the Base if you use the
Handset to make the call.
3) If either the Handset or the Base
parties want to leave the conference,
either side can press OFF (on the
Handset) or SPEAKERPHONE(on
the Base) to leave.
REVIEWING CALLER ID
RECORDS
NOTE: Caller ID and Call Waiting ID
are subscription services, available
through most local telephone service
providers. These are optional services;
you are not required to subscribe to
them. However, to receive Caller ID on
your SBC9030, subscription through
your local phone company is required.
With the Handset in the OFF (on hook)
mode:
•
Press MENU
1.
•
Using the
/
soft keys scroll
until 1. Caller ID is highlighted
•
Press the ENTER soft key.
2.
•
Use the
/
soft keys to scroll
through the Caller ID records. The
SBC9030 will store the last 50
Caller ID records to come in.The
latest one will be in #01.
•
Press OFF to exit Caller ID mode.
MEMORY DIALING
FROM THE HANDSET
With the Handset OFF (on hook):
•
Press the MEM soft key.
1.
• Enter Memory Location (01-25).As
soon as you enter the second digit,
the contents of the selected Memory
Location will be displayed.
•
Press PHONE key or the DIAL soft
key to dial the displayed phone
number.
1 9
OFF
Advertisement
Table of Contents
