Table of Contents
Advertisement
AXIS C1111-E Cabinet Speaker
The web interface
• Certificate (only with transport mode TLS): Select a certificate.
• Verify server certificate (only with transport mode TLS): Check to verify the server certificate.
• Secondary SIP server: Turn on if you want the device to try to register on a secondary SIP server if registration
on the primary SIP server fails.
• SIP secure: Select to use Secure Session Initiation Protocol (SIPS). SIPS uses the TLS transport mode to encrypt traffic.
• Proxies
-
-
-
-
-
• Video
-
-
-
-
DTMF
Add sequence: Click to create a new dual-tone multifrequency (DTMF) sequence. To create a rule that is activated by
touch-tone, go to Events > Rules.
Sequence: Enter the characters to activate the rule. Allowed characters: 0–9, A-D, #, and *.
Description: Enter a description of the action to be triggered by the sequence.
Accounts: Select the accounts that will use the DTMF sequence. If you choose peer-to-peer, all peer-to-peer accounts will share
the same DTMF sequence.
Protocols
Select the protocols to use for each account. All peer-to-peer accounts share the same protocol settings.
Use RTP (RFC2833): Turn on to allow dual-tone multifrequency (DTMF) signaling, other tone signals and telephony events in
RTP packets.
Use SIP INFO (RFC2976): Turn to include the INFO method to the SIP protocol. The INFO method adds optional application layer
information, generally related to the session.
Test call
SIP account: Select which account to make the test call from.
SIP address: Enter a SIP address and click
Access list
Proxy: Click to add a proxy.
Prioritize: If you have added two or more proxies, click to prioritize them.
Server address: Enter the IP address of the SIP proxy server.
Username: If required, enter the username for the SIP proxy server.
Password: If required, enter the password for the SIP proxy server.
View area: Select the view area to use for video calls. If you select none, the native view is used.
Resolution: Select the resolution to use for video calls. The resolution affects the required bandwidth.
Frame rate: Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
H.264 profile: Select the profile to use for video calls.
to make a test call and verify that the account works.
35
Advertisement
Table of Contents
