Kaz Пайдалану Бойынша Нұсқаулық - Marta MT-TP2004A User Manual

Electric thermo-pot

OPERATION

1. Add water. Pour an appropriate amount of water into the glass bottle (purified water is recommended), plug in the power and click "Power" button

temperature. At this time, press the "Settings" button

selected insulation temperature. When the product is working, press the "Power" button to return the product to standby mode.

2. Water dispensing. Automatic water dispensing: Press and hold the "Child safety lock" button

to select the water dispensing time (10-15-20 seconds). The water discharging time is displayed on the left digital tube. Select it. Then the water will be discharged automatically. During the water discharge

process, press the "Water Discharge" button again to stop the water discharge. Manual water dispensing: Press and hold the "child lock" button for 2 seconds to cancel the lock (the child lock button light goes

out), press the "manual water dispensing lever" to release water, and release the "manual water discharging lever" to stop water dispensing; manual water discharging is not limited by the water dispensing

time.

3. Boil again. Click the "Reboil" button

, and the water in the heat preservation state will boil again. At this time, the left digital tube displays 100 degrees, and the water will enter the standby state after

boiling.

4. Child lock. After the device is turned on and you click the "Power" button for 5 seconds, the "Child Lock" button will automatically activate; the "Child Lock" button will only lock the "Water Dispense" button

and will not lock during the process of dispensing water. The locking function will automatically start 5 seconds after the dispensing of water stops.

CLEANING AND MAINTENANCE

When cleaning the airpot, make sure to unplug from the power source and the hot water has cooled down completely before taking it out from the airpot. It is advisable to clean the airpot inside and outside

before using for the first time. Cleaning the airpot scheduled once a month or as desired to ensure water quality and to lengthen service life of inner pot. When the airpot is not going to be used for a long time,

it should be cleaned and dried before sealing in a plastic bag and stored in a safe, dry place.

TECHNICAL SPECIFICATION

WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)

Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th

and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.

MANUFACTURER: COSMOS FAR VIEW INTERNATIONAL LIMITED - ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA

KAZ ПАЙДАЛАНУ БОЙЫНША НҰСҚАУЛЫҚ

ҚАУІПСІЗДІК ШАРАЛАРЫ

Аспапты пайдаланар алдында осы нұсқаулықты мұқият оқыңыз және кейін анықтама алу үшін сақтап қойыңыз.



Алғашқы қосу алдында бұйымның таңбалауында көрсетілген техникалық сиаттамалары жергілікті желіңіздегі электр қоректенуге сәйкес келетінін тексеріңіз.



Тек тұрмыстық мақсатта пайдаланыңыз. Аспап өнеркәсіәпте қолдануға арналмаған.



Бөлменің сыртында пайдаланбаңыз.



Жұмыс істеп тұрған аспапты қараусыз қалдырмаңыз.