Table of Contents
Advertisement
3. SETTING UP THE RAS FEATURE
● Advanced button
If the drive usage monitoring is enabled, click Advanced to display the following
window. If the drive usage monitoring is disabled, the setting cannot be performed
because the button becomes inactive.
The following window appears when a drive is not mounted in the optional drive bay.
If you mount the drive in the optional drive bay, the detailed settings of drive bay 3
will be added to the display.
Figure 3-5 Advanced Setting for the Drive Usage Monitoring
●
●
NOTE
Set the notification threshold depending on the type of the mounted drive. For
the recommended replacement cycle of each drive, refer to the "APPENDIX
HANDLING REPLACEABLE COMPONENTS" in the "HF-W7500 Model 65/60
INSTRUCTION MANUAL (manual number WIN-62-0075)".
"Function is available" check box
・Selected：
The drive usage monitoring is enabled.
(default factory-shipped setting)
・Cleared：
The drive usage monitoring is disabled.
"It reports when the used hours passes
Enter an integer value in hours ranging from 100 to maximum value in the
step of 100.
The default factory-shipped setting is 20000 (hours).
The maximum value that can be set is 99900 (hours).
3-8
hours " box
Advertisement
Table of Contents
