Finishing The Log Information Collection Window; Figure 7-1 Organization Of The Folders For Collected Data - Hitachi HF-W7500 65 Feature Manual

5. A directory is created under the directory specified as the destination directory to save.
The name of the directory is assigned based on the date and time of the operation.
Under the directory just created, collected data is saved.
If the following folder structure is not created, the collection of log information might
fail. In that case, collect the log information again.
Specified YYMMDD_
directory hhmm directory

Figure 7-1 Organization of the Folders for Collected Data

(*1) The name of the directory is "YYMMDD_hhmm".
YY: Lower two digits of the year, MM: Month, DD: Day, hh: Hour, mm: Minute
Example: If the date is saved at 13:59 on Feb 1, 2022
Directory name: "220201_1359"
(*2) The following data is saved.
・If Gather log data is selected: logsave.zip
・If Gather memory dump files are selected: MEMORY.zip and minimum memory dump files
⑥
Double-click the saved logsave.zip file and MEMORY.zip file to confirm that the
inside of the zip files can be seen.
If you cannot see the inside, there is a possibility that the zip file is corrupted. In this
case, collect log information again.

7.2.4 Finishing the log information collection window

To close the log information collection window, click Cancel.
7. FEATURES RELATED TO MAINTENANCE AND FAILURE ANALYSIS
logsave.zip : Log data file (*2)
(*1) MEMORY.zip : Memory dump file
Windows
directory
7-7
Minidump : Minimum memory dump
directory files are stored