Status Codes To Be Displayed; Priorities Of Displayed Codes; Status Display Digital Leds Control Functions; Table 4-11 Priorities Of Hardware Status Display Mode - Hitachi HF-W7500 65 Feature Manual

4. CHECKING THE HARDWARE STATUS

4.4.4 Priorities of displayed codes

The following shows the priorities of the codes displayed by this feature.
(1) In the hardware status display mode
• STOP error code has the highest priority.
• The priority of a hardware status code differs depending on its cause. For details, see

"4.4.2 Status codes to be displayed".

(2) In the application status display mode.
• STOP error code has the highest priority.

4.4.5 Status display digital LEDs control functions

The following functions are offered as library functions for controlling the status display
digital LEDs. For details about the library functions, see "6.1 RAS Library".
⚫ Display an application status code: Use the SetStCode7seg function.
⚫ Turns off the currently displayed application status code: Use the TurnOff7seg function.
⚫ Sets the status display mode: Use the SetMode7seg function.

Table 4-11 Priorities of Hardware Status Display mode

Code class
STOP error code("80" is displayed)
Hardware status code
Application status code

Table 4-12 Priorities of Application Status Display mode

Code class
STOP error code("80" is displayed)
Application status code
Priority order
Priority order
4-22
1
2
3
1
2