Finishing The Log Information Collection Window; Figure 7-1 Organization Of The Folders For Collected Data - Hitachi HF-W6500 45/40 Feature Manual

4. The information selected at step 1 is collected. During the process, a window is
displayed to show the progress. If the process finishes successfully, the following
window appears.
5. A directory is created under the directory specified as the destination directory to save.
The name of the directory is assigned based on the date and time of the operation.
Under the directory just created, collected data is saved.
Specified YYMMDD_
directory hhmm directory

Figure 7-1 Organization of the Folders for Collected Data

(*1) The name of the directory is "YYMMDD_hhmm".
YY: Lower two digits of the year, MM: Month, DD: Day, hh: Hour, mm: Minute
Example: If you perform the maintenance operation at 13:59 on Jan 1, 2006
Directory name: "060101_1359"
(*2) The following data is saved.
・If Gather log data is selected: logsave.dat
・If Gather memory dump files are selected: memory.mcf and minimum memory dump files

7.2.4 Finishing the log information collection window

To close the log information collection window, click Cancel.
7. FEATURES RELATED TO MAINTENANCE AND FAILURE ANALYSIS
logsave.dat : Log data file (*2)
memory.mcf: Memory dump file
(*1)
windows
directory
7-5
Minidump: Minimum memory dump files
directory
are stored