Table of Contents User Guide .............................. 1 Introduction ............................. 4 Monitor Description ......................4 Package Contents ......................... 4 Product Overview ........................ 5 Important Information ........................8 Safety Information ......................8 Environmental Information ....................11 Regulatory Information ...................... 12 Equipment Symbols ......................13 Cleaning the Display ........................
Page 3
6.4.8.2 OSD Time Out ......................33 6.4.8.3 Auto Power Off ....................... 33 6.4.9 Display Information ....................34 6.4.9.6 Reset ........................34 Supported Video Modes ....................35 Technical Specifications ........................36 Outline Dimension ......................... 38 3 / 40...
1. Introduction 1.1 Monitor Description The equipment is intended for general use in commercial environments for human-machine interface (HMI) and display for reference. It was designed with high resolution, operational safety, and long service life in mind. 1.2 Package Contents 23.8”...
1.3 Product Overview Front View The image below shows the front view of the display. Image 1-1 Front view 1. P-CAP touch screen 2. Bezel 3. LED 5 / 40...
Page 6
Side View The image below shows the control key located in the right bottom corner of the display. Image 1-2 Control Key 1. Menu/Enter key / Scrolling key 6 / 40...
2. Important Information 2.1 Safety Information General Recommendations Read the safety and operating instructions before operating the device. Save the safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use.
Page 9
Power Cords: Do not overload wall outlets and extension cords as this may result in fire or electric shock. Main leads protection (U.S.: Power cord): Power cords should be routed so that they are not walked upon or pinched by items placed upon or against them. Pay particular attention to cords at plugs and receptacles.
Page 10
Caution To prevent fire or shock hazards, do not expose this monitor to rain or moisture. Also, do not use this monitor’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted. ...
2.2 Environmental Information Disposal Information Waste Electrical and Electronic Equipment This symbol on the product indicates that under the European Directive 2012/19/EU, governing waste from electrical and electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
2.3 Regulatory Information FCC Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
2.4 Equipment Symbols Electrical and Electronic Equipment Symbols Indicates the device meets the requirements of the applicable CE directives. Indique que l'appareil répond aux exigences des directives CE applicables. Indicates compliance with Part 15 of the FCC rules (Class A or Class B) Indique la conformité...
Page 14
Indicates the device serial number Indique le numéro de série de l'appareil Indicates the device part number or catalog number Indique le numéro de série de l'appareil Warning: dangerous voltage Attention : tension dangereuse Caution Mise en garde Indicates this device must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive Indique que cet appareil ne doit pas être jeté...
3. Cleaning the Display 3.1 Cleaning Instructions To clean the display Cleaning the display using a sponge, soft clean cloth, or soft tissue with lightly moistened recognized cleaning product for the equipment. Read and follow all labeled instructions on the cleaning product. In case of doubt about a certain cleaning product, use plain water. CAUTION: Be careful not to damage or scratch the front glass or LCD screen.
4. Monitor Installation WARNING: Sufficient expertise is required to install this equipment. All devices and complete setup must be tested before operation. AVERTISSEMENT : Une expertise suffisante est requise pour l'installation de cet équipement. Tous les appareils et la configuration complète doivent être testés avant d'être mis en service.
4.2 Stand Removal & VESA Mount Installation This monitor provided with a validated stand. The monitor has been designed to be used in landscape position with a maximum tilt of -5° forward to 30° backward. If a different stand is needed in the final application, the monitor VESA interface (VESA 100 mm standard) could be used.
Page 18
Image 4-2-2 Remove the 4x M4 screws Image 4-2-3 Remove the stand from the monitor. 18 / 40...
Page 19
5. Attach the monitor in landscape position to a 100 mm VESA mounting bracket. If mounted in portrait position, the OSD menu cannot be rotated. Image 4-2-4 VESA mount is located at the back of the monitor. 19 / 40...
5. Daily Operation 5.1 Main Power switch The monitor is switched on or off with the main switch, see image 1-2 Control key. 5.2 Power/Status Indication During start-up the monitor performs signal detection before going into normal operation mode. Depending on the detection result, the status LED on the side of the monitor will show different LED color.
6. OSD Menu Operation The Charts displays the function tree and brief explanations of the functions. Color, OSD, and other adjustments have submenus under each tree. 6.1 On-Screen Display The LCD monitor features an On-Screen Display (OSD) menu with easily identifiable icons designed to make adjustment of your monitor display settings a more user-friendly process.
Page 23
Exit Video Mode Full Adjust AspectRatio Exit English French German Italian Polish Language Spanish Dutch Czech Russian Japanese Simplified Chinese Exit Exit OSD Position H. Position Setup V. Position OSD Time Out AutoPower-Off Display Information Reset 23 / 40...
6.4 Main Menu Image 6-4 Main OSD menu 6.4.1 Exit To exit the OSD menu. 6.4.2 Picture Adjust Image 6-4-2 Picture Adjust OSD menu • Exit: To exit the Picture Adjust of the OSD menu. 24 / 40...
6.4.2.1 Contrast This function allows the user to adjust the contrast setting of the monitor manually. Image 6-4-2-1 Contrast OSD menu 6.4.2.2 Brightness This function allows the user to adjust the monitor’s brightness setting manually. Image 6-4-2-2 Brightness OSD menu 6.4.2.3 Adv.
6.4.2.4 ECO Mode This function allows the user to select setting of ECO Mode manually. Image 6-4-2-4 ECO Mode OSD menu • Exit: To exit the ECO Mode of the OSD menu. 6.4.2.5 Blue Light Reducer This function allows the user to select setting of Blue Light Reducer manually. Image 6-4-2-5 V.
6.4.3 Input Select Image 6-4-3 Input Select OSD menu Exit: To exit the Input Select of the OSD menu. Auto: Allows users to Enable the Auto Select function of the display setting. 6.4.4 Audio Adjust Image 6-4-6 Audio Adjust OSD menu •...
6.4.4.2 Mute This function allows users to Mute (On) & Unmute (Off) the audio output of the display setting. Image 6-4-4-2 Mute OSD menu 6.4.4.3 Digital Audio This function allows users to select the audio input source of the display setting. Digital (HDMI or DisplayPort) &...
6.4.5.1 User User: User can adjust and set tones. Image 6-4-5-2 User OSD menu Red: Adjust red and equivalent colors at the range from 0 to 100. The greater the ◼ value is, the deeper the color is, and vice versa. Green: Adjust green and equivalent colors at the range from 0 to 100.
6.4.6.1 H. Position (Analog Video Only) The function allows user to manually adjust the image position horizontally on the screen. Image 6-4-6-1 H. Position OSD menu 6.4.6.2 V. Position (Analog Video Only) The function allows user to manually adjust the image position vertically on the screen. Image 6-4-6-2 V.
6.4.6.5 Sharpness The function allows users to adjust the sharpness of the display setting manually. Image 6-4-6-5 Sharpness OSD menu 6.4.6.6 Video Mode Adjust The function allows users to select the video mode adjustment of the display setting manually. Image 6-4-6-5 Video Mode Adjust OSD menu 31 / 40...
6.4.7 Language Exit: To exit the Language of the OSD menu. English, French, German, Italian, Polish, Spanish, Dutch, Czech, Russian, Japanese & Simplified Chinese OSD menu languages are available for users to select preferred languages. Image 6-4-7 Language OSD menu 6.4.8 Setup Image 6-4-8 Setup OSD menu Exit: To exit the Setup of the OSD menu.
6.4.8.1 OSD Position Image 6-4-8-1 OSD Position OSD menu Exit: To exit the OSD Position of the OSD menu. OSD H. Position: Allows users to set the OSD menu in horizontal position on the display. OSD V. Position: Allows users to set the OSD menu in vertical position on the ...
6.4.9 Display Information The function provides users information of input source signal. Image 6-4-9 Display Information OSD menu 6.4.9.6 Reset Yes: Allows users to return the display settings back to factory default settings. Image 6-5-6 Reset OSD menu 34 / 40...
7. Technical Specifications Product description 23.8” LCD Touch Screen Monitor Screen technology Active screen size (diagonal) 607.45 mm (23.8”) Active screen size (H x V) 530.2 mm(H) x 296.46mm(V) Aspect ratio (H:V) 16:9 Resolution FHD (1920x1080) Pixel pitch 0.2745mm (H) x 0.2745mm (V) Color support 16.7M colors (8-Bits RGB) Viewing angle (H, V)
Page 37
Dimensions (W x H x D) 581 x 400 x 175 mm Carton Dimensions 702 x 277 x 526 mm (W x H x D) Net Weight with stand 8.7 kg ± 0.2kg Tilt Angle -5 ±2 and 30 ±2 degrees Mounting standard VESA (100 x 100mm) UL62368-1:2014, CAN/CSA C22.2 No.62368-1-14:2014,...
Page 39
Image 8-2 Outline dimension with monitor tilt 5° forward and 30° backward 39 / 40...
Page 40
TSI Touch Customer Service is available from 8:00 am to 8:00 pm Eastern Standard Time, Monday thru Friday except on national holidays. Customer Service can also be reached by visiting our website at www.tsitouch.com TSI24PDABVAZZZZ User Guide 40 / 40...
Need help?
Do you have a question about the TSI24PDABVAZZZZ and is the answer not in the manual?
Questions and answers