Mitsubishi Heavy Industries RC-EX3D Quick Reference
  1. Manuals
  2. Brands
  3. Mitsubishi Heavy Industries Manuals
  4. Remote Control
  5. RC-EX3D
  6. Quick reference

Mitsubishi Heavy Industries RC-EX3D Quick Reference

Hide thumbs Also See for RC-EX3D:
Table of Contents

Advertisement

Quick Links

Download this manual
REMOTE CONTROL
QUICK REFERENCE
This product complies with following directives/regulations
EU
MD
2006 / 42 / EC
LVD
2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodesign
2009 / 125 / EC
CE and UKCA marking is applicable to the area of 50 Hz power supply
Ce climatiseur est conforme aux
directives suivantes :
Machinerie
2006 / 42 / EC
Basse tension 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Conception écologique
2009 / 125 / EC
Le marquage CE est applicable dans les
zones d'alimentation électrique de 50 Hz.
Este aire acondicionado cumple con
las siguientes directrices.
Maquinaria
2006 / 42 / EC
Bajo voltaje 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodiseño
2009 / 125 / EC
La marca CE corresponde al área
de suministro de energía de 50 Hz.
GB
SMR S.I.
2008 / 1597
EER S.I.
2016 / 1101
EMC S.I.
2016 / 1091
RoHS S.I.
2012 / 3032
Ecodesign S.I.
2020 / 1528
Questo condizionatore è
conforme alle seguenti norme:
Macchine
2006 / 42 / EC
Bassa tensione 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecoprogettazione 2009 / 125 / EC
La marcatura CE è applicabile
all'area di alimentazione elettrica
di 50Hz.
Deze airconditioner voldoet aan
de volgende richtlijn.
Machinerie
2006 / 42 / EC
Lage spanning 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodesign
2009 / 125 / EC
CE-markering is van toepassing
op het gebied met een
netstroom van 50 Hz.
English is Original
RC-EX3D
Bu klima aşağıdaki yönerge ile
uyumludur.
Makine
2006 / 42 / EC
Alçak gerilim 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Çevreci tasarım 2009 / 125 / EC
CE 50Hz güç kaynağının alanı
için de geçerlidir.
Diese Klimaanlage entspricht
den folgenden Richtlinien.
Maschinen
2006 / 42 / EC
Niederspannung 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodesign
2009 / 125 / EC
CE Herstellung ist in Bereich
mit 50 Hz Stromversorgung
anwendbar.
Este ar condicionado respeita
as seguintes directivas.
Maquinário
2006 / 42 / EC
Baixa Voltagem 2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodesign
2009 / 125 / EC
Tomada CE é aplicável a área
da fonte de alimentação 50Hz.
Quick reference
ENGLISH
Kurzanleitung
DEUTSCH
Aide-mémoire
FRANÇAIS
Consulta rápida
ESPAÑOL
Guida rapida di riferimento
ITALIANO
Beknopte handleiding
NEDERLANDS
Hızlı referans
TÜRKÇE
Guia de referência rápida
PORTUGUÊS
Skrócona instrukcja obsługi
POLSKI
Данный кондиционер
удовлетворяет нормам
следующих директив:
по машинному оборудованию
2006 / 42 / EC
по низковольтному оборудованию
2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Ecodesign 2009 / 125 / EC
Маркировка CE применима к
регионам с энергоснабжением
с частотой 50 Гц.
Ten klimatyzator spełnia wymogi
niżej wymienionej dyrektywy.
Maszynowa 2006 / 42 / EC
Niskonapięciowa
2014 / 35 / EU
EMC
2014 / 30 / EU
RoHS
2011 / 65 / EU
Dot. ekoprojektu 2009 / 125 / EC
Znakowanie CE ma
zastosowanie do obszaru prądu
zasilającego 50 Hz
PJZ012A231
202306

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC-EX3D and is the answer not in the manual?

Questions and answers

Related Manuals for Mitsubishi Heavy Industries RC-EX3D

Summary of Contents for Mitsubishi Heavy Industries RC-EX3D

  • Page 1 English is Original REMOTE CONTROL RC-EX3D QUICK REFERENCE Quick reference ENGLISH Kurzanleitung DEUTSCH Aide-mémoire FRANÇAIS Consulta rápida ESPAÑOL Guida rapida di riferimento ITALIANO Beknopte handleiding NEDERLANDS Hızlı referans TÜRKÇE Guia de referência rápida PORTUGUÊS Skrócona instrukcja obsługi POLSKI This product complies with following directives/regulations Bu klima aşağıdaki yönerge ile...

  • Page 3: Table Of Contents

    OPERATION Refer to the “User's manual” on the following web site for details. http://www.mhi-mth.co.jp/en/products/detail/air-conditioner_users_manual.html Contents 1. Safety precautions …………………………… 2 2. Functions and menu items of the remote control …………………………………………… 4 3. Basic Operation ………………………………… 6 4. Menu operations ………………………………10 5.

  • Page 4: Safety Precautions

    1. Safety precautions ● Please read the precautions written here carefully to operate the unit properly. You are required to observe these fully because every item of these instructions is important for safety. Failure to follow these instructions may result in serious consequences WARNING such as death, severe injury, etc.
  • Page 5 CAUTION Do not use or let use the unit or remote control as play equipment. Improper operations could cause ill health or health disorder. Never disassemble the remote control. If you touch internal parts accidentally, you could get electric shocks or cause trouble. Consult your dealer when it is necessary to inspect its interior.

  • Page 6: Functions And Menu Items Of The Remote

    2. Functions and menu items of the remote control Names and functions of sections on the R/C (Operating section) Run/Stop if there is no operation for certain switch 5 LCD period of time. (With backlight) One push on the button starts Lighting period of the backlight operation and another push stops lighting can be changed.
  • Page 7 Main menu Basic operation Run ………………………………………………………………………………………… 6 Stop ………………………………………………………………………………………… 6 Change operation mode ………………………………………………………………… 6 Change set temp ………………………………………………………………………… 6 Change flap direction …………………………………………………………………… 7 Change the fan speed …………………………………………………………………… 8 F1, F2 switch operation …………………………………………………………………… 8 Anti draft ON/OFF operation …………………………………………………………… 8 High power operation ……………………………………………………………………...

  • Page 8: Basic Operation

    3. Basic Operation Stop Press the Run/Stop switch while the unit is in operation. The operation lamp turns off and the operation stops. Push the Run/Stop switch. When the operation stops, all operation buttons on the screen turn Operation lamp (green) lights and operation starts. off.

  • Page 9: Change Flap Direction

    ■ For allowable temperature setting ranges, refer to the range setting of set temp. ■ Reference set temp Cooling … 26 to 28°C Dry … 24 to 26°C Heating … 20 to 24°C Fan … Setting temp is not required. ■...

  • Page 10: Change The Fan Speed

    Change the fan speed Tap the Change the fan speed button When the Change the fan speed on the TOP screen. screen is displayed, tap the button of Change the fan speed desired fan speed. After setting the fan speed, the display returns to the TOP screen.

  • Page 11: High Power Operation

    High power operation The high power operation adjusts the room temperature quickly to a pleasant level by increasing the operation capacity. The high power operation continues for 15 minutes at the maximum and returns to the normal operation automatically. When the operation mode is changed, the high power operation returns to the normal operation, too.

  • Page 12: Menu Operations

    4. Menu operations Restrictions on the sub R/C R/C operations Main Run/Stop, Change set temp, Change flap direction, Auto swing, Change fan speed operations ○ ○ Anti draft ○ × High power operation, Energy-saving operation ○ ○ Silent mode control ○...

  • Page 13: Settings And Operations

    Cautions for each setting screen • When returning to the screen mentioned below from each setting screen, operate the following buttons or switches. ■ Return to Main screen … button Menu ■ Return to the last previous screen … button Back ■...
  • Page 14 If a desired day of the week 1 is tapped on the display, contents of current setting for the day are displayed. (☞5 For the holiday setting, tap the block 2 under a day to switch between “ ” (the holiday setting) and “(Blank)” (reset). Peak-cut timer Timer does not operate on the day set as holiday.

  • Page 15: Automatic Temp Set Back

    ■ Automatic temp set back It returns to the set temperature when the set time is counted up. Tap the Menu button on the TOP screen and select Energy-saving setting Automatic temp set back . The ⇒ Automatic temp set back Automatic temp set back screen is displayed.
  • Page 16 Use the ▲ ▼ button to set the time, and tap the button. You can set the time between 1 to 50 hours in 1-hour intervals. Temporarily set the period required between the time when it continuously judges that there are no human after the "Operation wait"...

  • Page 17: Individual Flap Control

    Individual flap control Motion range (upper, lower, left, or right limit positions) of the flap at each blow outlet can be set to a desired range. ■ When the R/C is set as the sub R/C, the individual flap control cannot be set. Tap the Menu button on the TOP screen and select...

  • Page 18: Anti Draft Setting

    Advice Flap2 Swing range Flap2 setting is completed When the unit is installed within 50 cm from a wall, it is recommended that you change the range Setting the range of flap 2 Do you want to set the of the left/right flap motion as follows: range of flap motion? motion is complete.

  • Page 19: Ventilation Operation

    Ventilation operation (when ventilation device is installed) The ventilation is turned on or off if the ventilation device is installed. Tap the Menu button on the TOP screen and select Useful functions ⇒ External ventilation . ■ The ventilation operation is enabled in case that the External ventilation is set “Independent” (refer to the installation manual for details). ■...

  • Page 20: Date & Time Display

    ■Date & time display You can set and correct the date & time display. Tap the Menu button on the TOP screen and select User setting Initial settings Date & time display . ⇒ ⇒ The Clock setting screen is displayed. Tap the button after the setting.

  • Page 21: Timer

    ■Controller sound You can set to have the controller sound ON/OFF when the touch panel is operated. Tap the Menu button on the TOP screen and select User setting Initial settings Controller sound . ⇒ ⇒ The Controller sound setting screen is displayed. Tap ON or OFF for the controller sound.

  • Page 22: Set On Timer By Hour

    ■Set ON timer by hour When the set time elapses, the air conditioner starts. Tap the Menu button on the TOP screen and select Useful functions ⇒ Timer ⇒ Set ON timer by hour . The Set ON timer by hour setting Set the following operating conditions.

  • Page 23: Set On Timer By Clock

    ■Set ON timer by clock Starts the operation of the unit at the set clock time. Tap the Menu button on the TOP screen and select Useful functions ⇒ Timer ⇒ Set ON timer by clock The Set OFF timer by hour setting screen is displayed. Select a desired time to start operation (5-min intervals) with the ▲...

  • Page 24: Confirm

    Screen to check contents of current Detail setting screen for the timer setting is displayed. setting contents is displayed. Weekly timer Weekly timer When the contents are changed or 1 Tap the State button to switch Weekdays Weekdays:No.1 State Type Time Mode Fan Temp...

  • Page 25: Registering Favorite Setting

    Registering favorite settings Operation mode, set temp, fan speed, fan direction can be registered as Favorite set 1 and Favorite set 2. Allocating these settings to the F1 and F2 switches allows you to perform operations with these registered settings with a single tap of the button. Refer to the F1/F2 function setting on how to set the F1 and F2 switches.

  • Page 26: Select The Language

    [Starting control with F1 or F2 switch] Change the F1 ( F2 ) switch function to the silent mode control in the F1 ( F2 ) function setting. When you press the F1 ( F2 ) switch, the administrator password input screen is displayed. After you enter the password, the silent mode control will start. To terminate the silent mode control, press the F1 ( F2 ) switch again.

  • Page 27: Auto Anti Draft Ctl

    Auto anti draft ctl You can set each blow outlet operation for auto anti draft ctl and can also enable/disable for allow to air flow volume up. ■ When the R/C is set as the sub R/C, the auto anti draft ctl cannot be set. Tap the Menu button on the TOP screen and select Useful functions Auto anti draft ctl .

  • Page 28: Wireless Interface Setting

    ■ After setting using the R/C, you need to set from the application "Smart M-Air". For information about how to install and operate "Smart M-Air", refer to the "WF-PAC-E" manuals on the MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD. website.

  • Page 29: Control Mode & Eco Level

    Control mode & Eco level Automatically controls the capacity depending on the R/C set temperature and the indoor temperature, which enables the energy-saving operation without sacrificing comfort. ■ When the R/C is set as the sub R/C, the control mode & eco level cannot be set. Tap the Menu button on the TOP screen and select Useful functions ⇒...

  • Page 30: Maintenance And After-Sale Service

    6. Maintenance and After-sale service Filter sign reset In order to announce the time for cleaning of the air filter, the message of “Filter cleaning. Touch here.” is displayed when the cumulative operation time of the IU reaches the preset time. After you clean the filter, you must reset the operation time. Tap the message display on the TOP screen.

  • Page 31: Contact Company & Error Display

    Contact company & Error display If any error occurs on the air conditioner, the “Unit protection stop” is indicated on the message display. Take the following measures, stop the operation and consult your dealer. "Prot.stp.ON E Touch here for contact. History can be checked from Menu." will be displayed on the message display. Menu 1 To check the error contents, tap the Menu...
  • Page 34 5 The Square, Stockley Park, Uxbridge, Middlesex UB11 1ET, United Kingdom Tel : +44-333-207-4072 Fax : +44-333-207-4089 https://www.mhiae.com MHIAE SERVICES B.V. (Wholly-owned subsidiary of MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD.) Herikerbergweg 238, Luna ArenA, 1101 CM Amsterdam, Netherlands P.O.Box 23393 1100 DW Amsterdam, Netherlands Tel : +31-20-406-4535 http ://www.mhiaeservices.com/ MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONERS AUSTRALIA, PTY.

Table of Contents