IBM X 330 Series Installation Manual page 24

3. Install the new hard disk drive in the drive bay:
4. If you disconnected the external cables and power cords, reconnect them now;
5. Check the hard disk drive status light and activity light to verify that the hard disk
12
IBM xSeries 330 Type 8675: Installation Guide
a. Ensure that the tray handle is open (that is, perpendicular to the drive).
b. Align the rails on the drive assembly with the guide rails in the drive bay.
c. Carefully push the drive assembly into the bay until the drive connects to the
backplane.
d. Push the tray handle toward the closed position until it locks the drive in place.
then, turn on the server.
drive is operating properly.
• If the amber light is on continuously, the drive has failed (only when a
ServeRAID adapter is installed).
• If the amber light flashes slowly (one flash per second), the drive is being
rebuilt (only when a ServeRAID adapter is installed).
• If the amber light flashes rapidly (three flashes per second), the controller is
identifying the drive.
Filler panel
Hard disk drive
Drive tray
Drive tray handle
(in open position)
Hard disk drive
activity light
Hard disk drive
status light