Electrolux HHOB870S User Manual page 15

Hide thumbs Also See for HHOB870S:
Table of Contents

Advertisement

Available languages

Available languages

AUTO
The function automatically adjusts the fan
speed level based on the selected heat
setting level of the hob.
When you use the hob for the first time, the
function is usually activated by default.
You can activate the function while the hob is
on and none of the cooking zones are active,
or at any point during the cooking session.
If you activate the function while the hob
is off, none of the cooking zones operate
and there is no residual heat visible on
the control panel, the function will switch
off by itself after a few seconds.
1. Press and hold
2. Press AUTO to activate the function.
A signal sounds and an indicator above the
symbol appears.
Automatic modes - fan speed levels
Hood
Residual heat level (hob is off)
mode
0
H1
-
-
H2
-
-
H3
-
-
H4
-
If you deactivate the hob while AUTO is
running, the function will be remembered
for the next cooking session.
Hood timer
Use the function to specify how long the hood
should operate.
It is not possible to set the hood timer while
the hood is deactivated.
1. Press
next to the hood control bar.
to activate the hob.
-
-
-
1
3. Place cookware on the hob and select a
heat setting level. Increase or decrease
the heat setting level as needed.
The hood will react to the heat setting level,
increasing or decreasing the fan speed level
accordingly. The indicators above the hood
control bar appear.
4. Press 0 on the hob control bar to
deactivate a cooking zone or
deactivate the hob.
If the residual heat indicator appears, AUTO
will continue to adjust the fan speed. If the
remaining heat is low, Breeze might start
operating as well.
5. To deactivate the function during cooking
and switch to the manual mode of the
hood, press AUTO or any other setting on
the hood control bar.
A signal sounds and the indicator above the
symbol disappears.
Residual heat level (hob is
on)
-
-
-
-
-
1
-
1
1
1
1
2
2. Press
or
minutes).
3. Press
to start the timer.
The timer begins to count down.
• Once the timer finishes counting down, the
hood stops operating.
• It is possible to set the hood timer while
AUTO is on. If AUTO deactivates the hood
before the set time runs out, the timer will
be reset.
• If the timer deactivates the hood before
AUTO, the function will be switched off.
The indicators above 0 and AUTO will
disappear.
to
Boiling
Frying
-
1
1
1
1
2
2
3
to set the time (00-99
ENGLISH
15

Advertisement

Chapters

Table of Contents
loading

Table of Contents