First Time Installation - Strong D555 Series Manual

• Use the remote control by pointing it towards the remote sensor. Items between the remote control
and the remote sensor could block normal operation.
• Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control or
put the remote control in a high humidity place.
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will not work.
If so, please change the lighting or TV's position, or operate the remote control closer to the remote
sensor.
* to con rm your choices use OK button or right ARROW button.
NOTE: This TV is equipped with two remote controls. You can choose to use both remote controls or just
one. It is possible to pair only the small Remote Control, however the second remote control can
still be used in the traditional way without a Bluetooth connection as the rst one.

3. FIRST TIME INSTALLATION

After all connections have been made properly, switch your TV on. Please follow the initial First Time
Installation (FTI) procedure on your screen and complete the installation. It will take a few minutes.
Step 1
Select your preferred language and location on the welcome page, then select CONTINUE to go
to the next step.
Step 2
Press  and - key simultaneously, while pointing to the TV bottom within the distance of 1 meter at least 3
seconds, Release your nger when the indicator light (red) of the remote ashes.
Language
English
Afrikaans
Bahasa Melayu
Català
Češ na
Dansk
Press and key simultaneously,
while poin ng to the TV bo om within the distance
of 1 meter at least 3 seconds. Release your finger when
the indicator light (red) of the remote flashes.
Loca on
Algeria
Agola
Albania
Australia
Bengal
Belgium
Con nue
11