Live Tv Usage - Strong D555 Series Manual

To connect to a wired network
1. Ensure you have:
- An Ethernet cable long enough to reach your TV
- A router or modem with an available Ethernet port
- A highspeed Internet connection
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the Network Con guration menu to con gure the TV.
Connecting to a wireless network
NOTE: The graphics are for representation only.
To connect to a wireless network:
1. Ensure you have:
- A router broadcasting a 2.4GHz wireless signal
- A highspeed Internet connection
2. Select your Wi-Fi network from the Available networks list and enter password for connection.
3. Use other options of menu to con gure the connection (if required).
Please refer to chapter 6 to read more about Smart features of your TV.

5.0 LIVE TV USAGE

Select Live TV application from Home screen or one of TV sources from input menu to watch live TV
channels. Press OK to start this application.
This application gives you access to live TV to watch and enjoy your favorite TV and radio programs from TV
sources (ATV, Antenna, Cable or several of Satellites) of your choice.
In case if you skipped channel installation part during FTI and enter application for the rst time, application
will recommend to perform channel scanning and installation.
NOTE: Please note, that you can't watch anything, if there are no channels scanned and installed.
21
Fig. 6b