(5) Open the cap of the anchor light socket,
fit the protrusion on the anchor light into
the slot in the socket, and then install the
light into the socket.
1
1
Cap
2
Slot
3
Protrusion
(6) Fit anchor light stopper B into the anchor
light socket.
1
Anchor light stopper B
Equipment operation
To store the anchor light:
(1) Pull anchor light stopper B upward, re-
move the anchor light, and then close the
cap of the anchor light socket.
(2) Unscrew anchor light stopper A from the
center section of the anchor light pole,
and then fold the pole.
3
(3) Connect the stoppers by fitting the protru-
sion on anchor light stopper A into the slot
in anchor light stopper B.
2
1
Anchor light stopper A
2
Anchor light stopper B
1
(4) Install the anchor light into the anchor
light holder, and then close the lockable
storage compartment.
2
1
65