Pre-Operation Check Points; Pre-Launch Checks; Steering System Checks; Remote Control Lever Checks - Yamaha 210FSH SPORT 2022 Operator's Manual

Pre-operation checks

Pre-operation check points

Pre-launch checks

Perform the pre-launch checks in the pre-op-
eration checklist while the boat is on land.

Steering system checks

Make sure the steering wheel is not loose.
There should not be any free play, either in-
and-out or in rotation. Turn the steering wheel
fully to the right and left to make sure opera-
tion is smooth and unrestricted throughout
the whole range.
Make sure both the jet thrust nozzles change
directions as the steering wheel is turned.
The jet thrust nozzles should point to star-
board (right) when the wheel is turned to the
right. The jet thrust nozzles should point to
port (left) when the wheel is turned to the left.
There should not be free play between the
steering wheel and the jet thrust nozzles. In
addition, check that the direction of the artic-
ulating keel changes according to the move-
ment of the jet thrust nozzles.
87
1
1 Jet thrust nozzle
2 Articulating keel

Remote control lever checks

WARNING
Do not touch the shift gates while the re-
mote control levers are being operated,
otherwise, you could be pinched.
Operate the remote control levers several
times to make sure that operation is smooth
throughout the whole range.
2
F
5
3
7
6
8
1 Neutral position
2 TDE position
3 Forward position
4 Reverse position
5 Shift
6 Fully closed
7 Throttle
8 Fully open
1
2
N
1
R
5
4
7
6
8