Panasonic NV-DS99EN Operating Instructions Manual page 38

• )l§ [POWER] IS BB t&Mft[VCR] (tikl&Wtfflt.) °
• t^[OTHER FUNCTIONS]™*±W[SEARCH](TO)W«ft
[SCENE] (i§^) •
WMi?|(w]SO i
X
•
frfammmsmmm
[**«]&© i #.
• . *am[si]ft*,
• a«n?iwM •
mxm
&m
• fe»«[S2]^&[S9] •
°
■
m
• jErsm&iS]
Ii9||f) o
mmnsmm.mt.nTi't
•
&&asE?!SXfE
o
■ jftft
ENGLISH
Searching for the Beginning of Recorded Scenes
(Scene Index Search)
•Set the [POWER] Switch to [VCR].
• Set [SEARCH] on the [OTHER FUNCTIONS] Sub-Menu to
[SCENE].
Scene Index Search in Forward Direction
Press the Index Button [►«] Q on the Remote Controller.
Scene Index Search in Reverse Direction
Press the Index Button [hM] © on the Remote Controller.
•When you briefly press the corresponding button once, the
[SI] Indication appears and the search for the next scene
marked with an index signal starts. After the Scene Index
Search has started, every time you press the button, the
indication changes successively from [S2] to [S9], and the
beginning of the scene corresponding to the selected number
is located ©. After reaching the desired scene, playback
starts automatically. (At a time, Scene Index Search in
forward or reverse direction is possible up to the ninth scene
marked with index signal from the present tape position.)
•If the interval between two scene index signals is less than
1 minute, the Scene Index Search may not work correctly.
•The Scene Index Search may not work correctly for scenes
recorded near the beginning of the tape.
• If you keep the [m] or [►►)] Button pressed for more than
2 seconds, the Intro Search Function is activated and it plays
back the beginning of all scenes marked with an index signal
on the cassette one after another for a few seconds each.
(To cancel the Intro Search Function, press the Play Button
[►] © or the Stop Button [■] ©.)