Panasonic NV-DS99EN Operating Instructions Manual page 65

&
ENGLISH
M[VCR FUNCTIONS] ±2gm_t:[OTHER
FUNCTIONS] (
m
)^ W [ 12bit AUDIO] (12frgM) lift
mwt&m '
sti :
mnkmm
sg^
■.
ST2 : M»^J!ft5g#:
MIX : IH-JE»J5^^StSlt«}|I»WS^ »
• $P*£i»?TtlB8£i* ■ &S^±£*f7fcteftSP# - SISI
jikSP^m - •
a»7fc1*#it5blS&(* 102) B# - g&lgffilijgttm • Wj£
}#it#£®rt¥ih •
Playing Back the Sound Recorded with Audio
Dubbing
Depending on the setting selected for [12bit AUDIO] on the
[OTHER FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS]
Main-Menu, the sound added with audio dubbing and the
original sound are played back as follows:
STI: The original sound alone is played back.
ST2: The dubbed sound alone is played back.
MIX: The original sound and the sound added with audio
dubbing are played back together.
•It is not possible to perform audio dubbing on an unrecorded
part of the tape.
•If there was an unrecorded part on the tape when audio
dubbing was performed, picture and sound distortion occur at
that tape portion during playback.
• If you reset the Tape Counter to zero at the point where you
want the audio dubbing to end and turn on the Memory Stop
Function (*♦ 102), the audio dubbing automatically stops
when the tape reaches that point.