Table of Contents
Advertisement
5 Maintenance
5.1 Lens Cleaning
5.1.1 Dust / Dirt on the outer casing part(s)
1. Blow off the dust frst, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up the Outer casing part with the dry fuzz-free cloth.
5.1.2 Dust / Dirt on the Lens Glasses.
Defne the location of the dust / dirt frst, whether it is outside lens surface or not.
1. When it is outside surface of the lens
When the dust and / or dirt gets on the outer side surface of the Lens glasses, order the following procedures.
a. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not Blow too strongly.)
b. Wipe out the dirt on the lens glass surface with Lens cleaning KIT (VFK1900BK) if necessary.
(Consult the Instruction sheet which is included in the Lens cleaning KIT in details.)
2. When it is inside of the lens
When there is dust / dirt inside surface of the 1st lens holder,Cam barrel and 7th lens frame unit, remove it by referring to the following
procedures.
1. When removing 1st lens holder,Cam barrel and 7th lens frame unit, it has to be proceed inside of satisfed clean level.
(Less than class 10,000 (Federal Standard 209D))
As for clean box, refer to the "3.2. Clean Box", in details.
2. When install the screws, use torque driver (RFKZ0456) with specifed torque.
file:///C|/U...Temp/Rar$EXa0.493/viewing/SGML_VIEW_DATA/ALL/H-FS35100PP/SVC/DSC1410024CE/doc/DSC1410024CE_05.xml[11/12/2018 12:18:50 PM]
Advertisement
Table of Contents
