Summary of Contents for Digital Watchdog Blackjack DX DW-BJDX11 T-LX Series
Page 1
Quick Start Guide State of the art hyper-optimized video management platform designed for ease, speed and efficiency. Blackjack® DX™ Linux slim desktop servers — Up to 80Mbps DW-BJDX11XXT-LX Default Login Information for DW Spectrum® IPVMS Default login information for the server’s OS Username: admin Password: admin12345 Username: dwuser...
FRONT PANEL Power button Microphone jack Headphone jack 2x USB 3.0 ports USB 2.0 ports System health LED Reset button REAR PANEL AC power socket PS/2 keyboard and PS/2 mouse ports DVI-D port True HD port 2x USB 2.0 ports Mic in (pink) Line out (green) Line in (blue)
Quick Start Guide SETTING UP THE SERVER STEP 1: Connect external devices, power and network. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B9 on the diagram). Configure the camera’s network first, then configure the server’s local network. NOTE See page 2 for detailed back panel breakdown for each model.
STEP 2: Configure date and time (cont.) 5. Click Date & Time and set correct date and time 6. Click Time Zone and set to correct Time zone. (type one of the largest cities in the time zone) 7. Close Settings. STEP 3: Configure network Please have the following information ready before starting the network configuration.
Page 5
Quick Start Guide 5. Restart the connection by switching OFF then turn ON. 6. Click Settings of the Ethernet not connected. 7. Change to Manual then enter Address, Netmask, Gateway then DNS. 8. Click Apply to save. 9. Connect the network cable and verify the connection. NOTE If you are not connecting to the Blackjack from the same network, you may be required to perform...
Page 6
STEP 3: To check for updates Click on the menu then click “System Administration”. 2. Go to the updates tab. If the system requires updating, click on the update system button. If you are on the latest version, it will say “You have the latest version installed”...
Page 7
Quick Start Guide Click “All” to apply the recording settings to the entire schedule. 6. A red dot will appear next to the camera in the resource tree once recording is started. NOTE: A Recording License is required to allow each camera to the archive. STEP 6: Backup database Go to the system administration window and click on the general tab.