Table of Contents
Advertisement
Using the STARBOOK-S as a Stand Alone Unit
The STARBOOK-S works with its self-contained batteries so it may be used by itself.
This is a
convenient feature for downloading software for update, downloading comet data or for use as a
star chart.
*You cannot activate functions relating to the mount drive.
Connecting to LAN
The STARBOOK-S is designed to connect to a PC with a LAN cable so that the latest firmware or
application programs can be downloaded through a website for upgrading.
For information on availability of the latest firmware version of the STARBOOK-S, visit Vixen
home page address below.
http://www.vixenoptics.com/downloads.htm
Crossover LAN cable
Use a commercially available crossover LAN cable which fit the LAN connection terminal of the
STARBOOK-S described blow.
O Use a crossover LAN
X A crossover LAN cable
cable without cover.
with cover may not fit.
Connecting the LAN cable
Opening the sliding cover on the upper side of the STARBOOK-S shows the LAN connection
terminal as shown in the figure. Make sure of the direction of the LAN cable and connect it
properly.
42
Hide quick links:
Advertisement
Table of Contents
